American Audio DIGI-PRO User's Guide Page 186
- Page / 228
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
ProControl Guide180
To record dynamic automation of a Plug-In:
1 Make sure that Plug-In automation is enabled in the AU-
TOMATION/ENABLE switch section.
2 Set the appropriate channel to the desired automation
mode (Write, Touch, Latch, Trim, etc.)
3 Press a channel INS/SEND switch. This displays the cur-
rent Inserts/Sends for the channel in the DSP EDIT/ASSIGN
displays.
4 Select the Plug-In you wish to automate by pressing the
corresponding SELECT/AUTO switch. To access another
page, press any lit CHANNEL MATRIX switch (1-32). To arm
or disarm the MASTER BYPASS function for automation,
press OPT(ALT)ALL > MASTER BYPASS.
5 With the desired automation parameter displayed in the
DSP EDIT/ASSIGN displays, press the corresponding AS-
SIGN/ENABLE switch. The display temporarily displays
AUTO ON and the ASSIGN/ENABLE switch illuminates. If
the channel is already armed for automation recording, the
SELECT/AUTO switch will begin to flash.
6 Press PLAY. Automation recording begins.
7 Rotate the parameter encoder in the DSP EDIT/ASSIGN
section. The SELECT/AUTO switch indicates that the en-
coder has been touched and is recording automation. Fol-
lowing all Pro Tools settings for touch time-out and
thinning, automation will be recorded to the Plug-In auto-
mation playlist.
8 You can punch-out of automation recording at any time
by pressing the appropriate SELECT/AUTO switch. For more
information on punching out of automation recording, re-
fer to the next section.
- Digidesign ProControl 1
- Copyright 2
- Chapter 3. ProControl Basics 3
- Chapter 5. Recording 4
- Chapter 6. Editing 4
- Chapter 7. Plug-Ins and Sends 5
- Chapter 8. Mixing 5
- Appendix A. UTILITY Settings 5
- ProControl Guide 6
- Introduction to ProControl 7
- System Requirements 8
- ProControl System Contents 9
- ProControl Guide4 10
- Installing ProControl 11
- Additional software 12
- Assembling an Expanded System 13
- Dimensions (w x d x h) 14
- Hardware Connections 15
- 6. Ethernet 16
- 7. SW 1 and SW 2 16
- 8. Power 16
- Making the Necessary 17
- Connections 17
- Performance 18
- Step 3. Audio Connections 19
- About Stereo and Surround 19
- ProControl Guide14 20
- Connections for Stereo Mode 22
- Talkback/Listenback Input 23
- Slate/Dub (Rerecord) Output 24
- Connection 24
- Surround Monitoring Mode 25
- Optional Connections 27
- Fader Pack Connections 28
- Starting Up and Shutting 28
- Down a System 28
- Software Configuration 29
- ProControl Firmware 30
- Naming ProControl Units 30
- QuickStart System Test and 31
- Configuration 31
- Setup and Configuration 32
- Basic Configuration Options 32
- Fader Pack Options 33
- Troubleshooting 34
- ProControl Basics 35
- The Fader Section 36
- The Main Section 37
- Transport Switches 38
- Pre and Post-roll 39
- Defining in/out points 40
- 2 Enable Transport mode 41
- 3 Click OK 41
- ProControl Guide36 42
- To engage Commands focus: 42
- Display of EXT TRANS modes 43
- Pause mode 43
- Footswitch Control 44
- Level Meters 45
- WINDOWS Switches 45
- Time Counter Display 46
- ProControl Guide42 48
- STEREO Monitor Mode Overview 48
- Monitoring 49
- ProControl Guide44 50
- To enter UTILITY mode: 50
- Display of Current Settings 50
- Stereo and Surround mode 51
- STEREO MIX Switch 52
- SRC 1, 2, 3 Inputs 52
- MIX TO AUX/AUX Input 52
- Control Room Monitor Level 53
- Controls/Outputs 53
- AUX (5-6)/Aux. Monitor Out 54
- MUTE, DIM and MONO Controls 55
- Control Room ALT Switch 56
- UNDO and SAVE Switches 57
- The Numeric Keypad 58
- The TRACKPAD 58
- BANK SELECT 59
- To select a ZOOM/SEL mode: 61
- Pro Tools Edit Window: 61
- CLR / F1 62
- SCRUB/SHUTTLE Wheel 63
- ProControl Guide58 64
- To exit SCRUB mode: 64
- Using SHUTTLE Mode 65
- ProControl Guide60 66
- FUNCTION Switches 68
- The Escape Switch 68
- The Master Faders Switch 69
- The CHANNEL MATRIX 70
- The Big Picture 71
- 1/A, 2/B...32/SPACE 71
- BANK A-D 72
- SELECT MUTE SOLO PAGES 73
- SNAPSHOT 73
- REC / RDY CLR ALL 73
- CLR ALL (Clear All) Switch 74
- The PARAM/PAGES Switch 74
- When to use GO TO or VIEW 75
- Example of GO TO 75
- ProControl Guide70 76
- To engage VIEW mode: 76
- ALPHA Mode 77
- ProControl Guide72 78
- Working with Tracks 79
- DigiFaders 80
- Keyboard Shortcuts 82
- Using the SOLO CLEAR Switch 82
- Solo and Record Safe Modes 83
- The CHANNEL SELECT SWITCH 84
- ProControl Guide80 86
- TM LED (yellow) 86
- PRE/POST ASSIGN/MUTE Switch 87
- ASSIGN/MUTE Mode 88
- Tip for Expanded System 90
- Fine Adjust mode 91
- PAN Switch 92
- INPUT and OUTPUT Switches 93
- Master ASSIGN Switch 94
- SEND MUTE Switch 94
- SEND Switches (A/F - E/J) 94
- The FLIP Switch 95
- Example of EQ/DYN Edit Mode 96
- EQ IN and DYN IN Mode 96
- Master IN/EDIT Switch 97
- Channel INS/SEND Switch 97
- REC/RDY and MSTR REC Switches 98
- ProControl 100
- Creating New Groups 101
- Overwrite 102
- Existing 102
- Enabling/Disabling Groups 103
- Editing Groups 103
- ProControl Guide98 104
- Selecting Groups 105
- Suspending Groups 106
- Deleting GROUPS 106
- Deleting All Groups 107
- ProControl Guide102 108
- Recording 109
- ProControl Guide104 110
- Shortcuts 111
- Displaying I/O Assignment: 112
- Monitoring Modes 113
- Record Modes 113
- LOOP REC 114
- QUICKPUNCH 114
- Step 5: Recording 115
- Loop Record Mode 117
- QuickPunch Recording 117
- Setting up Cue Mixes 118
- Slate/Dub (Rerecord) 120
- Talkback 121
- Listenback 122
- Listenback Level 123
- Listenback/Talkback Linking 123
- Enabling Listenback 123
- Using the DUB Function 124
- (Slate/Rerecord) 124
- Chapter 5: Recording 119 125
- ProControl Guide120 126
- Navigating, Zooming and 127
- Selecting with ZOOM/SEL 127
- PREVIOUS NEXT 128
- ZOOM / SEL 128
- Indicator 131
- Memory Locations and Markers 131
- Creating On-screen Selections 133
- ProControl Guide128 134
- Locations 135
- Capture, Separate, Trim 136
- EDIT TOOL Selection 137
- Trimming Regions 138
- Grabbing/Placing and Moving 139
- Selecting Regions 140
- Cut, Copy, Paste and Delete 141
- Grid Modes 141
- Nudging Regions 142
- Crossfades 143
- Fade from Start, Fade to End 143
- Editing Waveforms, MIDI and 144
- Plug-Ins and Sends 145
- INFO Switch 146
- INSERT/PARAM Switch 146
- SENDS Switch 146
- DSP EDIT/ASSIGN Switches 147
- SELECT/AUTO/PRE/POST Switch 147
- ASSIGN/ENABLE 148
- BYPASS 148
- D-Vrb (s) 149
- COMPARE/MASTER BYPASS 149
- CHANNEL/GROUP Display 150
- Assigning Plug-Ins 152
- Plug-In Editing 153
- Plug-In Display 154
- Bypassing Inserts 155
- ProControl Guide150 156
- All/All Selected Shortcuts 157
- ProControl Guide152 158
- BYPASS 158
- EQ and DYNamics 159
- In EQ/DYN EDIT mode: 160
- In EQ/DYN IN (bypass) mode: 160
- Accessing Plug-In Pages 161
- DSP EDIT/ASSIGN Section 164
- DVr-10.5 SlS 4.8 165
- Using the FLIP Switch 166
- FLIP Mode Basics 167
- FLIP Mode Applications 168
- Muting Sends 169
- Pre/Post Fader Send Status 170
- BYPASS/IN/OUT/Ø Status 171
- ProControl Guide166 172
- Signal Routing 173
- MASTER FADERS 174
- Automation Controls 175
- 1 2 3 4 5 6 176
- Automation Mode Color Display 177
- AUTOMATION 178
- AUTO SUSPEND 179
- Automation 179
- Chapter 8: Mixing 175 181
- Stereo Send Pan 182
- FLIP mode 184
- Automating Plug-Ins 185
- ProControl Guide180 186
- Chapter 8: Mixing 181 187
- Editing Automation 188
- Chapter 8: Mixing 183 189
- ProControl Guide184 190
- MUTES or Plug-In controls 190
- To utilize WRITE/TRIM mode: 190
- Write to Start/End/All 191
- Write to End 192
- Write to All 193
- Advanced Applications 194
- Setting up a post mix 195
- Use Session Templates 195
- ProControl Guide190 196
- UTILITY Settings 197
- Example of UTILITY Selection 198
- Remote (Local) 199
- UTILITY Mode 199
- Local Test Page 200
- UTILITY SYSTEM Settings 201
- MONITOR Settings 201
- MUTE/DIM Page 202
- TALKBACK 202
- Listenback Settings 203
- UTILITY TEST Settings 203
- Switch Test Mode 204
- Red LED Test Mode 204
- Yellow LED Test Mode 204
- Display Page 205
- Fader Page 205
- ProControl Guide200 206
- Rotary Page 207
- Mouse Page 207
- Reset (Factory Default) Page 208
- Prefs Pages 208
- Fader Resistance 209
- ProControl Guide204 210
- Audio Wiring Pinout Diagrams 211
- Audio Input 2 212
- Audio Output 213
- ProControl Guide208 214
- Numeric Keypad Transport Mode 215
- Numeric Keypad Shuttle Mode 216
- Memory Locations 217
- Commands Focus Shortcuts 218
- ProControl Guide214 220
- Numerics 221
- ProControl Guide216 222
- Index 217 223
- ProControl Guide218 224
- Index 219 225
- ProControl Guide220 226
- Index 221 227
- ProControl Guide222 228
Related products and manuals for CD players American Audio DIGI-PRO
(28 pages)
(91 pages)
CD players American Audio DCD-PRO240 User Manual
(250 pages)
(250 pages)
(52 pages)
(44 pages)© 2020, manymanuals.com. All rights reserved. | 1.507 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals