Chapter 8: Mixing 177
3 Display the appropriate SEND LEVEL control:
• In the Fader section, press the master SEND switches A/F-
E/J. In this mode, the data encoder can be used to enter
and record send level automation data.
– or –
• If you prefer working in the DSP EDIT/ASSIGN section,
make sure the desired channel sends are displayed in the
DSP EDIT/ASSIGN displays. In this mode, the encoders in
the DSP EDIT/ASSIGN section control send level and can
be used to enter and record automation data.
4 Press PLAY. Automation recording begins.
5 Rotate the data encoder (channel or DSP EDIT/ASSIGN,
depending on which method you are using) or move the ap-
propriate channel fader (if in FLIP mode) as desired.
✽ FLIP mode provides another way to automate send level. See
“FLIP mode” on page 178 for more information.
To automate Send Mute:
1 Make sure SEND MUTE automation is enabled.
2 Select a SEND in SELECT/ASSIGN, then press the master
SEND MUTE switch (this places the channel PRE/POST/AS-
SIGN/MUTE switch into send MUTE mode).
3 Arm the channel for automation recording and press
PLAY. Automation recording begins.
4 Use the channel PRE/POST/ASSIGN/MUTE switch to
mute sends.
If you are working in FLIP mode, use the channel MUTE
switch to mute sends.
✽ FLIP mode provides another way to automate send mute. See
“FLIP mode” on page 178 for more information.
Comments to this Manuals