ProControl Guide154
To set In/Out or Edit EQ/DYN mode:
■ Press the IN/EDIT switch, located to the left of the EQ
IN/EDIT switch row, until the desired state is shown: The
switch will be lit (green) when in default EDIT mode, and
will be unlit to indicate IN (bypass) mode.
In EQ/DYN EDIT mode:
■ The EQ and/or DYN switches accesses the channel’s EQ or
dynamics Plug-In parameters. This is a keystroke-saving al-
ternative to using the channel INS/SEND and DSP EDIT/AS-
SIGN switches to select and open a Plug-In for editing.
To open a channel’s first EQ or dynamics Plug-In for editing:
■ Press the IN/EDIT switch until it is lit, signifying EDIT
mode.
Press a channel EQ IN/EDIT or DYN IN/EDIT switch, as ap-
propriate. The first page of the first EQ or dynamics Plug-in
inserted on the selected channel will be displayed in the
DSP EDIT/ASSIGN section, ready to be edited or automated.
(Plug-In automation is explained in Chapter 8: Mixing.)
Visibility of Pro Tools Inserts/Sends Editor
Insert and Send parameters can still be edited in the DSP
EDIT/ASSIGN section even if the Inserts/Sends Editor for
the currently selected Plug-In is closed or hidden on-screen.
This “edit focus” mode of operation allows for maximum
editing speed on ProControl, avoiding the need for
Pro Tools to continually redraw the Plug-In’s interface on-
screen.
In EQ/DYN IN (bypass) mode:
■ The channel EQ IN/EDIT and DYN IN/EDIT switches by-
pass all supporting EQ or Dynamics Plug-Ins inserted in the
currently selected channels. This one-press “master
EQ/DYN bypass” switch is useful when you want to refer-
ence raw, pre-EQ (or pre-dynamics processing) tracks or in-
puts.
To determine the main mode for channel EQ and DYN
IN/EDIT, use the master IN/EDIT switch as described below.
Comments to this Manuals