American Audio Q-3433 SX Specifications download pdf (Page 9)

REAR PANEL - CONTROLS AND FUNCTIONS CONT.

©American DJ Supply® - www.americandj.com - Q-3433/SX User Instructions page 9

CHANNEL 2 - PHONO 2/AUX2 INPUT JACKS - The type of input must directly reflect the

selected mode of the CHANNEL 2 - LINE LEVEL SELECTOR SWITCH (48). Connect turntables

equipped with MM pickup cartridge to PHONO inputs (All DJ turntable use MM pick-up cartridges).

CD players or Tape Decks and other line level instruments may be connected to these jacks as

long as the CHANNEL 2 - LINE LEVEL SELECTOR SWITCH (48) is in the "AUX 2" position.

The red colored RCA jack represents the right channel input and the white represents the

left channel input.

CHANNEL 1 - PHONO 1/AUX1 INPUT JACKS - The type of input must directly reflect the

selected mode of the CHANNEL 1 - LINE LEVEL SELECTOR SWITCH (39). Connect turntables

equipped with MM pickup cartridge to PHONO inputs (All DJ turntable use MM pick-up cartridges).

CD players or Tape Decks and other line level instruments may be connected to these jacks as

long as the CHANNEL 1 - LINE LEVEL SELECTOR SWITCH (39) is in the "AUX 1" position.

The red colored RCA jack represents the right channel input and the white represents the

left channel input.

CHANNEL 1 - LINE LEVEL SELECTOR SWITCH - This switch is used to change the mode

of CHANNEL 1 - PHONO 1/AUX1 INPUT JACKS. When connecting turntable to these jacks

be sure the switch is in the PHONO position, and when using line level input devices select

AUX. Always be sure main power is shut off before change the position of the Line

Level Selector Switch.

AC VOLTAGE SELECTOR - Select between 115V/50Hz or 230V/60Hz. Make sure that the

selector is set to the proper voltage you are using.

AC CONNECTION - This connection is used for your detachable AC power cord. Be sure to only

plug your unit in to the recommended power supply.

BALANCED XLR MASTER OUTPUTS - The Master Output includes a pair XLR BALANCED

JACKS as well as a pair RCA UNBALANCED JACKS (44). The 3-pin XLR jacks send a high

current balanced output signal. These jacks should be used when you will be driving an amp

or other audio equipment with a balanced input, or whenever you will be running a signal

line greater than 15 feet.

LIGHT CONTROL OUTPUT - This jack provides a preset mono audio output signal. There is no

way to adjust this level, however this level will directly reflect the output level of the CHANNEL

SLIDERS (2). This buffered audio output should only be used for light controllers that can accept

an external audio input signal. Great for Touch Panels and Chase Controllers.

RCA MASTER OUTPUTS - The Master Output includes a pair XLR BALANCED JACKS (42) as

well as a pair RCA UNBALANCED JACKS. The RCA jacks send a low current unbalanced output

signal. These jacks should only be used for shorter cable runs to signal processors or looping to

another mixer. For cable runs greater than 15 feet use the XLR BALANCED JACKS (42).

REC OUT - This is a low current unbalanced output source designed for various tape and CD

recorders. The Record Out (REC OUT) level is dictated by the CHANNEL FADER LEVEL (2), it

is not influenced by the MASTER VOLUME CONTROL (27).

CHANNEL 3 - LINE 3 RCA INPUT JACKS - Connect CD players or Tape Decks to these

line level inputs. Line level musical instruments with stereo outputs such as Rhythm Machines

or Samplers should also be connected to LINE inputs. Turntables should only be connected

to "Phono" inputs. The red colored RCA jack represents the right channel input and the white

represents the left channel input.

37.

38.

39.

40.

46.

45.

44.

43.

42.

41.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

American Audio Q-3433 SX Specifications Page 9

Comments to this Manuals

Related products and manuals for DJ controllers American Audio Q-3433 SX