American Audio Q-3433 SX Specifications download pdf (Page 6)

FRONT PANEL - CONTROLS AND FUNCTIONS CONT.

©American DJ Supply® - www.americandj.com - Q-3433/SX User Instructions page 6

ZONE LEVEL TREBLE CONTROL - This knob is used adjust the high frequency output of

the ZONE LEVEL VOLUME OUTPUT(20). Turning the knob in clockwise direction will increase

the high frequency output, turning the knob in a counter-clockwise direction will decrease the

high frequency output.

ZONE LEVEL TREBLE CONTROL - This knob is used adjust the low frequency output of the

ZONE LEVEL VOLUME OUTPUT(20). Turning the knob in clockwise direction will increase

the low frequency output, turning the knob in a counter-clockwise direction will decrease the

low frequency output.

ZONE LEVEL VOLUME OUTPUT CONTROL - This rotary knob is used to control the zone

level volume. The zone level is not PFL, it is essentially a second master output volume with

separate output volume control.

CUE LEVEL VOLUME CONTROL - This knob is used to adjusts the headphone volume level.

SPLIT CUE - This button will activate the "Split Cue" function. When used with a set of stereo

head phones, the Split Cue function assign the Cue signal the left channel of the headphones

and assigns the Program (main output) signal to the right channel of the headphones. Essentially

splitting the cue signal in half. Please note that this function will only work with a set of

stereo headphones.

HEADPHONES JACKS - This jack is used to connect your headphones to the mixer. Use head

phones only rated at 8 ohms to 16 ohms. Most DJ headphones are rated at 16 ohm, these

are highly recommended. Always be sure the CUE LEVEL VOLUME (21) is set to minimum

before you put the headphones on.

HEADPHONES BASS CUT - This button is used to cut the bass frequencies from the headphone

output level.

MASTER LEVEL BALANCE CONTROL - This knob controls the balance level output of the

MASTER VOLUME FADER (27). The knob has center lock position for precise center panning.

Turning the knob to the "L" (counter-clockwise) position will increase the left channel output

level. Turing the knob to "R" (clockwise) position will increase the right channel output level,

while decreasing the left. To maintain a true stereo sound, level the balance control knob set

to the 12 O'clock, or center position.

CUE MIXING CONTROL - This functions allows you to monitor the Cue level as well as the

Program (main output) level in your headphones. A channels Cue Level may only be monitored

if the channels Cue function is selected. To select a channels cue function depress the CUE

BUTTON (1) that is directly associated with the specific channel you wish to monitor. You may

use the mixing function to blend both the Cue level and the Program level together. You can vary

the output level to either hear more or less of either of the two levels. Sliding the Cue Mixing fader

to the CUE position will allow you to hear more of the Cue level. Sliding the knob to the PGM

position will allow you to hear more of the Program level (main output). You may also use the

Cue Mixing Control to hear either the Cue level or the Program level exclusively. If the fader is

in the full CUE position you will only hear the cue level, if the fader is in the full PGM position

you will only hear the main output. This function will especially be useful for occasions when

an external monitor is not available.

MASTER VOLUME CONTROL - This fader is used to control the master output level (main

volume). To avoid distorted output try to maintain an average output signal level +4 dB. This fader

will control the XLR-BALANCED (42) output jacks and MASTER VOLUME RCA (44) jacks.

18.

20.

19.

22.

21.

23.

24.

25.

26.

27.

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Comments to this Manuals

No comments

American Audio Q-3433 SX Specifications Page 6

Comments to this Manuals

Related products and manuals for DJ controllers American Audio Q-3433 SX