American Audio Q-3433 SX Specifications download pdf (Page 7)

FRONT PANEL - CONTROLS AND FUNCTIONS CONT.

©American DJ Supply® - www.americandj.com - Q-3433/SX User Instructions page 7

“Q” START ON/OFF - This function works in conjunction with a compatible American DJ® "Q"

series professional CD player. When used with a compatible "Q" series CD player, you can

use the CROSSFADER (30) to start and stop the CD Player. The ON/OFF “Q” START switch

activates this FADER “Q” START feature. When in the ON position, the FADER “Q” START

function allows the fader to return automatically to the CD players preset cue point by simply

sliding the CROSSFADER (30) back and forth.

For example, each time you slide the crossfader to the far left, the "Q" start function will

trigger the play mode for any CD player connected to PLAYER CONTROL "A" (32).

Play will begin at that unit's last set cue point. Turn the "Q" ON/OFF SWITCH to the OFF

position to disengaged “Q” Start function and resume normal fader operation.

FADER ASSIGN SWITCH - This is a five position switch that assign a channel to the

CROSSFADER (30). When a channel is assigned to the left side of the CROSSFADER (30) that

channels output level will be controlled by the CROSSFADER (30). Sliding the CROSSFADER

(30) to left position will send full volume output to the MASTER VOLUME LEVEL (27) and sliding

the CROSSFADER (30) to right position will cut that channels volume to MASTER VOLUME

LEVEL (27). The reverse is true for the right channel fader assign switch.

FEATHER FADER PLUS™ CROSSFADER - The CROSSFADER blends the output signals of

any channels assigned to "Left" or "Right." When the fader is in the full "Left" position, the output

signal of any channels assigned to "Left" will be controlled by the MASTER VOLUME LEVEL

(27). The same fundamentals will apply for "Right." Sliding the fader from one position to

another will vary the output signals of the "Left" and "Right" channels respectively. When

the crossfader is set in the center position, the output signals of both the "Left" and "Right"

channels will be even.

MIC 2 VOLUME CONTROL - This knob is used to control the volume output level of

MICROPHONE 2 (51).

28.

29.

30.

31.

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

No comments

American Audio Q-3433 SX Specifications Page 7