American Audio Q-3433 SX Specifications download pdf (Page 10)

REAR PANEL - CONTROLS AND FUNCTIONS CONT.

©American DJ Supply® - www.americandj.com - Q-3433/SX User Instructions page 10

CHANNEL 2 - LINE 2 RCA INPUT JACKS - Connect CD players or Tape Decks to these

line level inputs. Line level musical instruments with stereo outputs such as Rhythm Machines

or Samplers should also be connected to LINE inputs. Turntables should only be connected

to "Phono" inputs. The red colored RCA jack represents the right channel input and the white

represents the left channel input.

CHANNEL 2 - LINE LEVEL SELECTOR SWITCH - This switch is used to change the mode

of CHANNEL 2 - PHONO 2/AUX2 INPUT JACKS. When connecting turntable to these jacks

be sure the switch is in the PHONO position, and when using line level input devices select

AUX. Always be sure main power is shut off before change the position of the Line

Level Selector Switch.

CHANNEL 1 - LINE 1 RCA INPUT JACKS - Connect CD players or Tape Decks to these

line level inputs. Line level musical instruments with stereo outputs such as Rhythm Machines

or Samplers should also be connected to LINE inputs. Turntables should only be connected

to "Phono" inputs. The red colored RCA jack represents the right channel input and the white

represents the left channel input.

MIC 3 INPUT JACK - This jack is used to a connect a microphone to the mixer. Connect you mic

to MIC 3 via 1/4 inch (6.3mm) jack. The signals will be controlled by CHANNEL SLIDER 4 (2).

BASS, MID, and TREBLE can be adjusted by the CHANNEL EQ (9, 10, &11).

MIC 2 INPUT JACK - This jack is used to a connect a microphone to the mixer. Connect you

mic to MIC 2 via 1/4 inch (6.3mm) jack. The signal level will be controlled by the MIC 2 VOLUME

CONTROL KNOB (31). BASS (4), MID (5), and TREBLE (6) levels can be adjusted.

47.

48.

49.

50.

51.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

No comments

American Audio Q-3433 SX Specifications Page 10