American Audio UCD-200 - REV 8-10 Specifications Page 58

  • Download
  • Add to my manuals
  • Print
  • Page
    / 100
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 57

SLAS495A− JUNE 2006 − REVISED OCTOBER 2007
www.ti.com
58
REGISTER 0DH: Programmable Delay In-Between Continuous Conversion
BIT NAME
RESET
VALUE
READ/
WRITE
FUNCTION
D15 NTSPDELE
N
0 R/W Programmable delay for non−touch screen auto measurement mode
0 => Programmable delay is disabled for non−touch screen auto measurement mode.
1 => Programmable delay is enabled for non−touch screen auto measurement mode.
D14−D12 NTSPDINTV 010 R/W Programming delay in−between conversion for non−touch screen auto measurement
mode
000 => 1.12 min
001 => 3.36 min
010 => 5.59 min
011 => 7.83 min
100 => 10.01 min
101 => 12.30 min
110 => 14.54 min
111 => 16.78 min
Note: These delays are from end of one set of conversion to the start of another set of
conversion.
D11 TSPDELEN 0 R/W Programmable delay for touch screen measurement
0 => Programmable delay mode is disabled for touch screen measurement.
1 => Programmable delay mode is enabled for touch screen measurement.
Note: This mode is valid only for touch screen related conversion in self−controlled mode
and in host−controlled mode valid for only continuous scan for X & Y coordinates or for
X, Y, Z1 & Z2 coordinates.
D10−D8 TSPDINTV 010 R/W Programming delay in−between conversion for touch screen measurement
000 => 1 ms
001 => 3 ms
010 => 5 ms
011 => 6.5 ms
100 => 8.5 ms
101 => 10 ms
110 => 12.5 ms
111 => 15 ms
Note: These delays are from end of one set of conversion to the start of another set of
conversion.
D7 CLKSEL 0 R/W Clock selection for the touch screen controller
0 => Internal oscillator clock is selected.
1 => External MCLK is selected.
Note: External clock is used only to control the delay programmed in between the
conversion.
D6−D0 CLKDIV 0000001 R/W Clock Division used to divide MCLK for getting 1 MHz clock for programmable delay, i.e.
MCLK/CLKDIV = 1 MHz,
0000000 => 128,
0000001 => 1,
0000010 => 2,
……
1111110 => 126,
1111111 => 127
REGISTER 0EH: Reserved
BIT NAME
RESET
VALUE
READ/
WRITE
FUNCTION
D15−D8 RESV FFh R/W Reserved. Write only FFh to these bits.
Page view 57
1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 99 100

Comments to this Manuals

No comments