American Audio Q-2422 - AUTRE User's Guide download pdf (Page 23)

PITCH ADJUSTMENTS

©American Audio® - www.americanaudio.us - MCD-710™ Instruction Manual Page 23

2. PITCH BENDING:

Unlike the PITCH SLIDER (

3) adjustment this function will momentarily increase or decrease a tracks speed

during playback. There are two ways to operate this function with the (-) & (+) PITCH BEND BUTTONS (14)

or with the JOG WHEEL (1)

. The maximum pitch bend percentage allowed is +/- 16% or (+/- 100% for CD).

The pitch bend function will work in conjunction with the PITCH SLIDER (3)

pitch setting. For example, if the

PITCH SLIDER (3)

is set to a 2% pitch gain the pitch bending process will begin at 2% and will continue to

the maximum of +/-16% or (+

/- 100% for CD).

NOTE: A -100% pitch manipulation will stop playback entirely.

Holding down on the (-) PITCH BEND BUTTON

(14) will provide a slow down in the playback

pitch.

Figure 29

Using the Pitch Slider Percentage

Selector (3): You may choose a pitch operat-

ing range at any time. To change the operat

ing range be sure the pitch function is turned

on, see figure 29. The pitch percentage can

be changed between +/-4%, +/-8%, +/-16%,

or (+/- 100% for CD). 4% will allow the least

amount of pitch manipulation and 16% or

(100% for CD) will allow the most amount

of pitch manipulation. To adjust the different

values, tap on the % BUTTON (11) until your

desired value is reached.

Figure 30

Holding down on the (+) PITCH BEND BUTTON

(14) will provide a speed bump in the playback

pitch.

Figure 31

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 32 33

No comments

American Audio Q-2422 - AUTRE User's Guide Page 23