American Audio DTI 1.8 Specifications download pdf (Page 10)

6. Counterweight (26):

Locate and remove the tone arm Counterweight (26) from the packaging. Slide Counterweight (26)

onto the rear of the Tone arm (4). Turn it lightly and it will screw onto the rear shaft of the tone arm.

Turntable Connections:

1. Connect the unit's stereo output leads to a receiver or mixer. The red phono terminal represents

the right output channel and the white terminal represents the left output channel.

2. The thin black wire with a spade connector is the ground lead. The ground lead must be con-

nected to the mixer (receiver) to avoid pops and clicks associated with magnetic pick-up system

such as turntables.

Output Leads Mixer (Receiver)

L (White) -----------------------------> L Channel

R (Red) -----------------------------> R Channel

GND (Spade)-----------------------------> Ground

3. Connect the power core to matching outlet for your area. Only connect the power cord after the

all other connections have been made

NOTE: Be sure to connect the ground terminals firmly to the Mixer or receiver.

SET-UP

©American Audio® - www.americanaudio.us - DTI 1.8™ Instruction Manual Page 10

Phono ground lead

Stereo phono lead

Phono ground lead

33 7 8

8 12 2 0

SPEED-RPM REVERSE PITCHSELECT QUARTZ

MOTOR OFF

33 7 8

8 12 2 0

SPEED-RPM REVERSE PITCHSELECT QUARTZ

MOTOR OFF

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

No comments

American Audio DTI 1.8 Specifications Page 10