©American DJ Supply® - www.americandj.com - Q-MX2 BPM User Instructions page 3
1. Be sure to save the packing carton in case
you may ever have to return the unit for
service.
2. Read all documentation before attempting to
operate your new mixer. Please save all your
documentation for future reference.
3. Do not spill water or other liquids in to or
on to your mixer.
4. Be sure that the local power outlet matches
that of the required voltage for your mixer.
5. Do not attempt to operate this unit if the
power cord has been frayed or broken.
Please route your power cord out of the way
of foot traffi c.
6. Always have the front gain controls set to
their lowest level during initial power-up to
prevent speaker damage.
7. Disconnect from main power before making
any type of connection.
8. Do not remove the top cover under any
conditions. There are no user serviceable
parts inside.
9. Disconnect the unit’s main power when left
unused for long periods of time.
Important Precautions
Introduction:
Congratulations and thank you for purchasing the
American DJ® Q-MX2BPM™ mixer. This mixer is a
representation of American DJ’s continuing commit-
ment to produce the best and highest quality products
at an affordable price. This mixer includes several inno-
vative features that pack a big punch! The Q-MX2
BPM™ comes with a 2 year limited war-
ranty!
Please read and understand this manual completely
before attempting to operate your new mixer. This
booklet contains important information concerning the
proper and safe operation of your new mixer.
Unpacking:
Carefully open and unpack your mixer. Be sure to
save the packaging in case you may ever need to
return your unit to the factory. After unpacking, inspect
the mixer for any type of damage that may have
occurred during shipping or transit. If you notice any
type of damage notify your dealer immediately for
instructions.
Set-Up Precautions:
Please make any connections before you plug the unit
in. Be sure the Power switch is in the OFF position
before connecting other devices to the mixer. All fader
and volume controls should be set to 0 or minimum
position, before the device is switched on. If the device
has been exposed to drastic temperature fluctuation
(e.g. after transportation), do not switch on the mixer
immediately. The arising condensation of water might
damage your device. Leave the device switched off
until it has reached room temperature.
Introduction
Index
• Safety Precautions....................................................................................................p.4
• Operating Introduction.............................................................................................p.4
•
Functions (Front Panel).............................................................................................p.5
• Inputs & Outputs (Rear Panel)................................................................................p.8
• Set-Up......................................................................................................................p.10
• Replacing the Crossfader........................................................................................p.13
• Operating Determinations......................................................................................p.13
• Technical Specifications........................................................................................p.14
• Warranty & Service.................................................................................................p.14
(20 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals