American Audio Q-2422 - AUTRE User's Guide download pdf (Page 24)

©American Audio® - www.americanaudio.us - SDJ-1™ Instruction Manual Page 24

PITCH ADJUSTMENTS (CONT.)

2. PITCH BENDING:

Unlike the PITCH SLIDER (5) adjustment this function will momentarily increase or decrease a tracks

speed during playback. There are two ways to operate this function with the (-) & (+) PITCH BUTTONS

(15) or with the JOG WHEEL (20). The maximum pitch bend percentage allowed by PITCH BUTTONS

(15) is +/-16%. The maximum pitch bend percentage allowed by JOG WHEEL (20) is +/-100%.The

pitch bend function will work in conjunction with the PITCH SLIDER (5) pitch setting. For example, if

the PITCH SLIDER (5) is set to a 2% pitch gain the pitch bending process will begin at 2% and will

continue to the maximum of +/-16%.

NOTE: A -100% pitch manipulation will stop playback entirely. This can only be done with JOG

WHEEL (20).

Holding down on the (-) PITCH BEND BUT-

TON (15) will provide a slow down in the play-

back pitch.

Figure 37

Using the Pitch Slider Percentage

Selector (14): You may choose a pitch

operating range at any time. To change the

operating range be sure the pitch function

is turned on, see figure 35. The pitch per-

centage can be changed between +/-4%,

+/-8%, and +/-16%. 4% will allow the least

amount of pitch manipulation and 16% will

allow the most amount of pitch manipula-

tion. To adjust the different values, press

the PITCH PERCENTAGE BUTTON (14) for

2 seconds to change the percentage, until

your desired percentage is reached.

Figure 38

Holding down on the (+) PITCH BEND

BUTTON (15) will provide a speed bump in

the playback pitch.

Figure 39

3. PITCH BEND BUTTONS (15):

The (+) PITCH BEND BUTTON (15) will increase track playback speed and the (-) PITCH BEND BUT-

TON (15) will decrease track playback speed. The extent to which the speed changes is proportion-

ate to the amount of time the button is pressed. For example, if the (+) PITCH BEND BUTTON (15) is

held down continuously as in Figure 39, the speed will increases and will continue to increase until

it reaches the percentage the PITCH PERCENTAGE BUTTON (14) is set to. When you release the (+)

PITCH BEND BUTTON (15) the speed will automatically return to it’s previous set speed.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30

No comments

American Audio Q-2422 - AUTRE User's Guide Page 24