American Audio DCD-PRO300 Owner's Manual download pdf (Page 8)

Programming

12

There are 7 user-selectable options so you

can customize your Pro300 for your own

preferences. The buttons labeled CITY and

BRT are also used to enter the Program

Mode, REVIEW your current program

settings, and to CHANGE any settings as

desired. The words PROGRAM, RVW, and

CHG are located on the top of the detector,

and are highlighted in colored graphics.

Pages 14-16 explain each option in more

detail.

How to use Programming

1 To enter Program Mode, press and

hold the CITY and BRT buttons for 2

seconds. The unit will beep twice, and will

display the word Program.

2 Then press the RVW button to

review the current settings. You can

either tap the button to change from item

to item, or hold the button to scroll through

the items.

3 Press the CHG button to change

any setting. You can either tap the button

to change from setting to setting, or hold

the button to scroll through all the options.

4 To leave the Program Mode,

simply wait 8 seconds without

pressing any button. The unit will display

Complete, beep 4 times, and return to

normal operation.

An example

Here is how you would turn Pro300’s

AutoMute feature off.

1 Enter the Program Mode by holding

both the CITY and BRT buttons down for

2 seconds. The Pro300 will beep twice and

display Program.

2 Then hold the RVW button down. The

Pro300 will scroll through the categories,

starting with Pilot

(Pilot), then Voice

(Voice), then Power-on sequence

(PwrOn), then Signal strength meter

(Meter), and then AutoMute (aMute).

3 Release the RVW button when Pro300

shows the AutoMute item. Since the factory

setting is for AutoMute to be on, Pro300

will display aMute ON.

If you accidentally don’t release the

RVW button in time, and the Pro300 goes

to the next category, hold the RVW button

down again, and after Pro300 scrolls

through all categories, it will begin again

at the top of the list.

4 Press the CHG button to change from

aMute ON to aMute OFF.

5 To complete the Programming, simply

wait 8 seconds without pressing any

button. The Pro300 will display

Complete,

beep 4 times, and return to normal

operation.

Overview of Programming

13

Pilot HWY

Pilot H

Pilot V

Voice ON

Voice OFF

PwrOn STD

PwrOn FST

Meter STD

Meter THT

Meter TEC

aMute ON

aMute OFF

City STD

City LoX

City NoX

Bands ALL

Bands MOD

X ON

or OFF

K ON or OFF

Ka USA or Intl or OFF

POP ON or OFF

LSR ON or OFF

SWS ON or OFF

TSR ON or OFF (Default is ON)

Press the CHANGE button

to change your setting

within a category

* Full word: Highway, AutoScan or City

Letter: H or A or C

Vehicle voltage

* Voice alerts on

Voice alerts off

* Standard power-on sequence

Fast power-on sequence

* Standard signal strength meter

Threat Display

Tech Display

* AutoMute on

AutoMute off

* Standard City mode sensitivity

Low X band sensitivity in City Mode

No X band sensitivity in City Mode

* Default bands

One or more bands are disabled

Turn bands “ON” or “OFF” by

pressing the VOLUME/MUTE button

Press the REVIEW button

to go from one category

to the next

PILOT

(Power-on indication)

VOICE

POWER-ON SEQUENCE

SIGNAL STRENGTH METER

AUTOMUTE

CITY MODE SENSITIVITY

BANDS

* Factory Default Settings

To reset Pro300 to its original

factory settings, press and hold

the “CITY” and “BRT” buttons

while turning the power on. The

Pro300’s display will provide a

Reset message, accompanied by

an audible alert, acknowledging

the reset.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments to this Manuals

No comments